Wi-Fi Signal Booster Installation Guide

Your Wi-Fi signal may not be strong enough to reach every corner of your home, business or office. Consequently dead spots may crop up in some of your spaces. Using a Wi-Fi signal booster will help to fill in the gaps and enable a smooth and reliable network. One of the best Wi-Fi signal boosters in the market today is Nikrans MA2500 WF.

The device is not only reliable but is designed to offer amazing speeds to enable you to stream HD quality videos at the comfort of your room.  Besides, the device is also easy to install as it comes complete with all the items that are required for easy installation. It is a plug and play device that needs only 15 minutes of installation time. Use the following easy steps to complete your installation once you have purchased your device:

  • Step 1: Choose the best location- where you put the booster determines its performance. To identify the best location, consider moving the booster around your house as you observe the results. The location that you choose should be indoor and should also be near to the power outlet on a wall.
  • Step 2: Mount the signal booster- using the installation manual or guide, use screws to mount the booster in the ideal location.
  • Step 3: Make a connection of the indoor antenna cables to the booster connector which is marked indoor. Ensure you have tightened the connection using a wench
  • Step4:  if you are using an outdoor booster, connect the outdoor antenna cables to the booster connector marked outdoor. Tighten the connection with hand or wench
  • Step 5: You then screw the stick antenna before you switch on the booster. Then connect the AC power cord to the signal booster and afterward connect the plug to the electrical outlet. This will power on your booster. You should then wait for a few seconds before you start experiencing improved signal.
  • Step 6: Move to the dead zones and test the signal. The Wi-Fi signal will be regarded as successful if it boosts the signal in the dead zones of your room. In case you are still experiencing poor signals, repeat the steps above by mounting the booster in different places.

Note that to receive the best signal, always place the booster halfway between the dead zone and the router

Finally, the Wi-Fi booster installation takes a few minutes. You will need just 15 minutes to install the Nikrans MA2500 WF booster. Choose this device today to start enjoying perfect Wi-Fi coverage in your place.